socioviews
229 posts
Oct 21, 2025
7:11 AM
|
Pile foundations are long cylinders that extends deep into the ground to provide stable footing for structures when shallow foundations are inadequate to resist overturning forces, settlement, or uplift. Pile foundations or simply piles are typically made of steel and reinforced concrete nowadays.
for sale steel sheet pile The following are some of the most common scenarios requiring the application of pile foundations:
ESC general catalog
Detailed Catalogue When the underlying soil is weak
Other types of foundation are not feasible due to cost or other factors
When water table is close to the ground surface and deep excavation is not practical
Site has settlement issues due to liquefaction
The presence of nearby deep-water channels that can cause massive seepage
There are possibilities of scouring or erosion
Mass foundations and deep excavation are not possible due to space restrictions such as the presence of nearby structures
When it is necessary to counter uplift forces due to water table rise or other causes
When counter-measures to overturning and lateral forces are necessary such as in areas with high frequency of seismic activities.
In cases of heavy and non-uniform loads which might cause differential settlement
Reclamations
When the structure is hit hard with hammers, hammers, or other objects manufacturer of steel sheets supplier of steel sheet piles Pile Foundation Classifications Pile foundations are classified according to function, material, and installation process.
I. According to function or use:
Wall Piles. In this application, many individual piles are interconnected to form a wall that counters lateral pressure and minimal vertical forces. Wall piles or sheet piles are used as retainers for loose soil and sometimes water in many temporary and permanent applications such as construction of cofferdams, water ways, shore protection, trenches, and more.
Load-bearing piles. These pile types are used to transfer vertical loads from the superstructure through stratas with poor bearing capacity to a strong layer of soil or rock.
According to how load is transferred, load-bearing piles can be divided into two categories: 1. End-bearing piles – the bottom end of the pile is rested or anchored at a strong layer of soil or rock. It acts exactly as a column. Check out Bore pile Manual.
2. The pile's stability is derived from the friction it experiences with the soil all around it.
Friction piles The friction pile works best on grounds with stiff clay. Ground improvement piles. They act as a group of friction piles, compressing or compacting the soil at predetermined intervals to increase density and bearing capacity
|
